How To Choose an Oil Filtration System That Suit The Best For You

Spread the love

Oil filtration is an important part of the industrial world, especially the oil industry Best Parker Distributor Indonesia. Although it is said to be important, oil infiltration is often underestimated and underestimated. Unknowingly, many oil industries suffer massive losses simply because they do not pay attention to the oil filtration system.

How To Choose an Oil Filtration System?

Some special criteria need to be taken into account in choosing a good filtration system. Even though the filtration system owned by company A is running smoothly, it may not necessarily be applied to company B. Therefore, we need to choose a good filtration system for the company, here are things to consider in choosing a good filtration system.

  1. Operating temperature

One of the first factors to consider when choosing a good oil filtration is the operating temperature. As we know the oil industry uses very high temperatures. So that the oil is protected from disturbing microbes, please use clear oil, not oil with a lot of impurities.

Squeezing the Oil from the fruit also requires using high temperatures to soften it and kill the enzymes. So that the entire oil processing process from start to finish uses high temperatures. Therefore we need to choose an oil filtration system that can withstand temperatures commonly used in a company. For example, if an oil refinery reaches a temperature of 150 F, the filtration system used must be able to withstand that temperature or hold a higher temperature it will be better.

  1. Flow rate

The rate in the oil industry especially infiltration systems means the amount of oil flowing per unit time through the filtration system. Before buying and choosing a filtration system for your company, you need to know the flow rate of the filtration. If the flow rate is too slow it will result in a buildup of residue.

The buildup of residue that occurs will certainly be detrimental, one of which is the residue that accumulates can go to the filtered oil, then the accumulated residue can also cause the filtration system to collapse. Therefore you need to determine the filtration with a flow rate that suits your company.

  1. Appropriate technology

Next, there is a technological factor, the right technology makes oil processing, especially in oil filtration, better. Although modern technology is always better among you still have to adapt it to the circumstances of your company. You must choose the most suitable penology used in oil processing in your company.

The technology in oil filtration Best Parker Distributor Indonesia focuses solely on removing the varnish content. In the oil industry, the varnish is an undesirable part of pure oils. If the pure oil produced can contain oil varnish, it can even be said to be not good and have low selling power. Therefore some technologies make varnish removal so that the varnish does not mix into the pure oil. But in some cases, the selection of the wrong technology in your company’s work system will make the varnish get into the oil.

The three factors above are the most important in choosing a good filtration system for your company Best Parker Distributor Indonesia. So that you can produce pure and highly marketable oil. Be careful not to be tempted by cheap products but you regret it, it’s okay to spend more money to get satisfactory results.